Koller Electronic Control Box Type 230 8091A, Variation S01 with speed regulation, 1 functions.
filling
Automatic filling through a button or a slot-machine.
Fill up through a button.
Filling time limit 10/20 minutes.
height control
minimum- /maximum height control
recovery time: 30/60 minutes
signal converter
push button signal / push button signal inverted
release sensor / release sensor inverted
zone roller
1-push-operation: one short push of the button changes the sequence or stops the program. A long push of the button puts the program into reference position.
rewash
Function is activated, if water was in the bath tub. Starts about 10 minutes after the tub is empty.
Alternatively it is possible to start / stop this function at empty tub with a button. duration of the rewash: 2 minutes
dry out
Starts automatically, if water was in the bath tub. The dry out starts about 20 minutes after the tub is empty.
Alternatively it is possible to start / stop this function with a button. duration of the dry out: 3 minutes
OFF-Timer
The running time limiter is activated, when the status indicator reads „Pool ready“ and the control panel registers the first pressing of the button. All whirlpool functions may be used as much, as you desire during the operating period. Upon reaching the running time limit, appliances switch off automatically. Should all functions be switched off during this time, the running time limiter will also reset automatically. The appliances may be immediately switched on after the automatic stop.
evacuation
evacuation valve:
After emptying the tub the drain of the remaining water opens automatically.
