The Elecro Generation has been designed for the user to select which way the primary and secondary water is to be plumbed to achieve maximum heat potential. This is achieved by turning the primary hot water flow in an opposing direction to the secondary cold water.

The Elecro heat exchanger operates via the primary hot water travelling through the titanium tubes inside one way and the secondary pool water travels the opposite way contacting the hot tubes on its way through, this is repeated and over a period of time will cause the secondary pool water to heat up. The elecro is easy to use and install with its 1.5" connections for rigid pipe to be solvent welded into and then can be unscrewed for maintenance work if needed, ideal for indoor and outdoor swimming pools and great for chlorinated and salt water application too. 

• Robust, Durable contraction
• Wall Mountable (Bracket supplied)
• 316 Stainless Steel shell with special polyamide fittings
• 38 piece Titanium internal tube bundle
• For indoor and outdoor swimming pools
• Thermostat Pocket
• Solvent weld unions for connections to rigid pipe
• 1.5" connections
• Suitable for salt chlorinated and solar heated swimming pools

• Analogue control thermostat: 0~40°C (1?C differential

• Grundfos booster pump

• Flow switch

• 1" female/female brass fitting