Heater Specification

Summary

• Flow requirements: 3-kW to 6-kW = 1m³/hour
                                  9-kW to 24-kW = 4m³/hour
                                  Maximum flow: 17m³/hour
• Heating Elements: Titanium. high MgO compaction
• Flow tubes: BS 316L Stainless Steel EN (1.4432) or Titanium 
• Control Thermostat 0~45°C (0.5°C differential) 
• Safety thermal cut out 55°C (manual reset) 
• Flow switch Gold tipped reed switch with titanium fulcrum pin 
• Wiring High temperature, silicone sheathed

Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
 *Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support