FAST UK DELIVERY
Secure Shopping
Over 100,000 orders shipped
Hassle Free Returns
Trusted by The Trade
Friendly Knowledgable Team
20 Years Established
Click & Collect
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Balboa Niagara Spa Pump - 3HP - 1 Speed

79mm Centre Suction x 79mm Side Discharge

Extended 1 Year Warranty

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. This can be arranged at the point of purchase or within a limited time afterwards.
An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. You will benefit from free repairs for the term of the warranty period & If your equipment can't be repaired then we will replace it free of charge.(A delivery surcharge may apply for non UK mainland addresses)
This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation.
If you would like any further information on our extended warranty scheme please call our Hydrospares team on 01326 371 488 OR email us at info@hydrospares.co.uk

LID: 2367
Balboa Niagara
Single Speed
3HP
2" x 2" (79mm x 79mm)
£551.70 Inc VAT
( £672.81)
PMP-4731
1023331, P529136-S
2 In StockSame day dispatch if ordered by 14:00
Fast UK Delivery
Extended Warranty Available
Extended Warranty Available
Add your 1 year warranty in the basket
Balboa Niagara Spa Pump - 3HP - 1 Speed
£551.70
RRP £672.81

Premier Niagara pumps are the ultimate benchmark in design, flexibility and performance. 

From small applications for zone seating and focused therapy up to multi pump configurations to run 100+ jetted systems, Niagara pumps supply
the specific performance features you require and the long service life and powerful performance spa owners demand.

Niagara pumps offer the options you need...an energy-efficient package, unsurpassed design, flexibility, ease of installation, high flow rate and dependable operation.

Common Part numbers
3HP / Single Speed: 1023331 / 1023018 / 1023038 / 1023005 / 1023036 / 1023059 / 1023060

Features

  • High flow rates exceeding 44 m3/h for maximum performance in your luxury applications.
  • All seals are carbon ceramic with Viton® Elastomers for long-lasting performance, easily enduring prolonged heat and chemical exposure.
  • Multi-directional volute mountings provide the flexibility to accommodate any configuration; 63mm, 2 and 2.5 union options.
  • Choose single or 2-speed motors from 2 or 3 HP. With 2-speed models, sanitation and heating can occur while maintaining lower operational costs.
  • Specify an ultra efficient motor and our highest efficiency hydraulics versions help meet appliance efficiency regulations.
  • The pumps are supplied with centre suction and 2 drain connections to ensure total drainage of pump.
  • The Niagara pumps are VDE approved according to European norms EN60335-1 and EN60335-2-41.

The Niagara hot tub pump range from Balboa are designed to replace the Ultimax pump from Vico and Sta-Rite. 

The wet ends fitted to the Niagara range are the same fitment and dimensions as the old Ultimax wet ends making for an easy swap over.

The large and powerful motor also benefits from a low profile electrical box, this makes these pumps easy to fit into tight spaces while retaining the strength of a 56 frame motor.

  • Uses 2 inch connections
  • The Niagara pumps are supplied with a cable.

IMPORTANT:  Balboa Niagara pumps has recently go through some changes in design. New pumps come with different style of motor. Please check the photos and make sure the new sizes are suitable for the designated space.

Model Information
Dimensions L x W x H 460x203x203mm
HEAD - H max 16.8m
FLOW - Q max 48M³/h
Type / Speed 1 Speed
Model Niagara
Horsepower 3.0 Hp
MPN 1023331
Motor Information
Voltage / Frequency 230V / 50Hz
Amp Draw 11.5 A
Power - P1 2.2 kW
RPM 2900
Frame Size 56F
Motor Type Finned Body (European Style)
Cord / Plug Type 3 Core AMP
Wet End Information
Union Connection Ref 2.0 " (Inch)
Configuration Center Suction, Side Discharge
Part No. 1215186
Connection Diameter 79mm
Thread Type Male - Buttress
Shaft Seal Type PS-201
More Info

Pump Specifications

Dimensions

  • 460 x 202 x 203 (mm)

Summary

  • Frame: 56
  • HP: 3 (2.5kW)
  • Discharge: Side
  • Ports: 2" Suction / 2" Discharge
  • AMPS: 11.5A
  • Speed: 1
Spares
COMPARE Balboa 48F/ 56F Wet End - 3HP - 2" x 2"
Balboa 48F/ 56F Wet End - 3HP - 2" x 2"
For Use with Niagara / Ultimax (Vico)
3 In StockSame day dispatch if ordered by 14:00
QF: WET-4577
£81.99
RRP: £102.41
COMPARE HS PRO Shaft Seal PS-201
HS PRO Shaft Seal PS-201
3/4" / 19mm Ø Shafts
44 In StockSame day dispatch if ordered by 14:00
QF: PMS-5494
£9.99
RRP: £11.01
COMPARE Hydrospares Pump Motor Bolt - Pack of 4
Hydrospares Pump Motor Bolt - Pack of 4
For 56 Frame Wet Ends
65 In StockSame day dispatch if ordered by 14:00
QF: BLT-3384-4PK
£2.00
COMPARE Waterway O-Ring - 68mm OD x 3.5mm
Waterway O-Ring - 68mm OD x 3.5mm
Suitable for 2.0" Pump / Heater Unions
78 In StockSame day dispatch if ordered by 14:00
QF: 3449
£0.99
RRP: £1.99
Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE