Gecko IN.Link Light LV 12 ft for X series control systems

• Coloured and Tagged Polarisers
• In.link are very cool output and input plugs and connectors that come with coloured and tagged polarisers designed to make sure all devices used with spas and hot tubs are well connected and at their right place. In.link connectors come in 3 sizes (HC, LC, low voltage) for 
• all types of output and input devices. They all include an integrated latch that maintains them in place and provides audible and tactile feedback when in.links are properly seated.
• They have also the definite advantage of reducing SKU numbers and inventory levels by giving OEMs and dealers total flexibility to easily configure output devices.
• The in.link connector system was designed to meet the requirements of the hot tub and the whirlpool market but its application can extend beyond these two applications.
• The high voltage connectors can be divided in two different families: one for High Current and one for the Low Current.Both families are similar, only the size of the connector is different.
• Latch Snap Effect & Strain Relief
• A latch mechanism is provided to maintain male and female connectors together. 
• The tab provided on the male part gives the operator an audible and tactile feedback at the insertion of the cable in the female part. 
• Once the latch is engaged, it will prevent both parts from separating unintentionally by vibration or shock. 
• To unplug the male connector, a gentle press on the tab will allow the release of the locking mechanism to separate both parts.
• Watertight Design UL & CE
• The female connector comes with a built-in seal ensuring a watertight connection assembly sealed from moisture and water ingress. 
• This sealing is intended to be suitable for the CE standards and the demanding spa environment.
• Keying Adaptor
• A keying adaptor is installed on the male and female connectors to prevent the connection of equipment into the wrong connector.
• Each keying adaptor has its unique key code located on its edge,as well as unique colours and identification. 
• The key code was designed to receive the male keying adaptor with the matching code. 
• The keying is also provided with a unique colour coded and engraved identification on the front surface.
• This helps reduce inventory and also SKU numbers. 
• For example,the same cable can be used for Pump 1, Pump 2 and Pump 3.During the final steps of spa assembly, the correct keys are added to the corresponding cables, just before plugging into the pack.