Mini Storm

All Waterway Mini Storm snap-in jets fit into this socket. It does not work with the newer thread-in jets, for which a dedicated socket is available.

The jet socket is the fitting attached to the spa (inside and outside of the spa wall), which holds the jet in place. 

The fixing nut and the gasket are included. 

Poly Storm

All Waterway Poly Storm snap-in jets fit into this socket. It does not work with the newer thread-in jets, for which a dedicated socket is available.

The jet socket is the fitting attached to the spa (inside and outside of the spa wall), which holds the jet in place. 

The fixing nut and the gasket are included. 

The flow of water through the socket sucks in air by the Venturi effect, thereby adding bubbles to your spa jet.

In order to manage the water and the air flow through the jets, the air nozzle is connected to a normal manifold and then on to a valve. 

If you do not want to have bubbles through the water jets, just close the air nozzle with a 3/8" plug.