Waterway Adjustable Mini Jet Body

The jet body or socket is the fitting attached to the spa (inside and outside of the spa wall), into which the jet slots.

The sealing between the jet and the hull is provided by a gasket (to be purchased separately). 

We also recommend the use of  a neutral silicone (without aggressive solvents) on the wall fitting as well as on the threads to ensure a complete seal.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. The air inlet of each jet is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified. If you do not want bubbles in the water jets, block the air inlet with this cap.

IMPORTANT: Details of Gasket has been verified with our stock however Manufacturers do occasionally change the type of the gasket supplied with the body. If you require specific type of the gasket please contact us to check current version.