Balboa PCB - 54146 Lite Leader Spa Pack
Sticker - BOARD BALBOA EUROLT LT LEADER
Chip - EUROLTR1A 20160811
This circuit board is a genuine Balboa replacement for boards labelled 54146 fitted to plastic Balboa Lite Leader spa control packs.
The Lite Leader PCB's are compatible with the Balboa Lite leader topside controls (6 pin)
- Possible replacement for SF50 (52078) & Master Spas (X800662)
The PCB should be fitted with all the dip switch settings the same as the faulty PCB being replaced. For correct installation, the PCB should be fitted by a qualified tradesman or electrician.
Please Note:
These are generic boards. If you are replacing a customised board you may encounter inconsistency with the topside control. Customised board are specified by the hot tub manufacture for specific models. Although the boards may look the same the will be programmed to the hot tub manufactures specifications. Custom boards are usually only available from the hot tub manufacture and, if available are usually quite expensive.
If you do experience inconsistencies after fitting a generic board then replacing the topside control panel as well usually remedies this.
PCBS - Non refundable (unless faulty)
*Please ensure you take care to select the correct PCB for your application, as all PCBs are non-refundable items - If you are unsure, please contact our friendly customer service team and we will do our best to give you the information we have available in order for you to be able to make the correct purchase (we cannot be held liable for any incorrect items purchased)
Note: All equipment must be installed by a competent individual or trades person, in accordance with the relevant electrical & building safety regulations. Installing an incompatible PCB may result in damage to it, and other system components, which is not covered by warranty.
PCB's and other sensitive electrical equipment cannot be returned if the sealed packaging has been opened, tampered with or if the item has been fitted.
If a PCB board is suspected of being faulty, it will need to be returned to us within the warranty period so it can be returned to the manufacturer for inspection & testing. If the item is deemed to be faulty, we will repair or replace it under warranty. If the board is not at fault or is found to have been damaged due to incorrect installation or misuse then the warranty will be void and an additional charge will be made to cover the costs of return shipping.
