Waterway Executive 56F Wet End - 5HP - 2" x 2 ½"
Waterway Executive 56F Wet End - 5HP - 2" x 2 ½"
Recommended Additions
Holds Motor Shafts Solid
Closed Faced Impellers
Unbelievably Handy
Holds Impellers For Removal
Product Details
Waterway Wet End - 56 Frame - 2 ½" Suction. For 2HP Pumps
- OEM wet end for the Waterway Executive hot tub pump range
- Fits 56 Frame motors, both European (finned) and American (smooth) style
- The 2 ½" suction on these wet ends allows for a greater intake flow of water. Fits a 2 ½" suction union and a 2" discharge union
- Fitted with 3 x drain/bleed screws
- Please Note: This wet end is labelled as 5HP (impeller HP rating). Motors and wet ends are combined to create an output HP
- This wet end is commonly found on 56 frame 2.5 & 3HP Waterway pumps and is the correct replacement wet end for 2.5 & 3HP complete pumps
- 5Hp
- 56F Volute number: 315-1220 (stamped on rear)
- Impeller P/N: 310-4180
- Impeller Dot Colour: None
Part Number
- Waterway: 310-1510
Technical Specifications
Wet End Information
| Configuration | Center Suction, Side Discharge |
| Impeller Diameter | 117 mm |
| Union Connection Ref | 2.5 " (Inch) |
| Connection Diameter | 79mm x 93mm |
| Spare Parts Available | Yes - See Spare Parts List |
| Thread Type | Male - Buttress |
| Part No. | 310-1510 |
| Impeller Dot Colour | None |
| Impeller Part No. | 310-4180 |
| Shaft Seal Type | PS-1000 |
| Impeller Vane Gap | 15 mm |
| Wet End Frame Size | 56F |
| Impeller HP Rating | 5HP |
| Wet End HP | 5Hp |
Compatible Wet End Thread Size
| Wet End Diagram |  |
Reviews (3)
Reviews (3)
Found staff, especially Gosia, very helpful and prompt. Overall I was given good advice to find my compatible part which was promptly delivered. Very good overall service. Thanks
We contacted Hydrospares as our Jacuzzi motor had ceased, the patience that the online staff (Richard & Goisa) had with us was fantastic as we didn´t know anything about what we needed. They went through everything and their help was brilliant I can not sing their praises high enough, we received the part , it fitted and the Jacuzzi is working. So happy....Thank you so much.
Questions & Answers
Does this pump have a 2 Inch discharge. I hope to fit it on a Winnipeg Canadian Spa. Many Thanks
Spares
5/8" / 15.8mm Shafts
For Air Relief Plugs / Drain Plugs 3/8"
Executive Volute Faceplate
Buttress Thread - Inc O-Ring
Fits Executive, Viper, Hi-Flo, Spa-FLo, E series, Iron Might
Executive & Hi Flo Pump Wet Ends
x8 - Fits most models
Related Products
Closed Faced Impellers
Holds Motor Shafts Solid
Holds Impellers For Removal
Unbelievably Handy
For Use with XP2e - Euro leg 6.1"
For Use with LP200/ WP200 - Post 2008
For Use with Aqua-flo XP2e Series
For Use with LP250 / WP250 - Post 2008
For Use with Aqua-flo CMCP
For Use with Aqua-flo XP2e - 6.3"
For Use with Waterway Viper
For Use with Balboa Dura-Jet (Cascade)
For JA / TDA50
We contacted Hydrospares after our hot tub would not work and the company who supplied it quoted £500. After several phone calls and chats we purchased the wet end only, £100 and it came the next day! Everyone we spoke to were exceptionally helpful, as we did not really not know what we wanted. Brilliant service. Thank You!