Balboa 48F/ 56F Wet End - 2HP - 2" x 2"
Balboa 48F/ 56F Wet End - 2HP - 2" x 2"
Product Details
Balboa Wet End Niagara / Ultimax (Vico) - 48F/56F - 2HP - 2" x 2"
OEM wet end for the Balboa Niagara / Ultimax (Vico) hot tub pump range.
Fits 2" (79mm) Unions.
This is the 2Hp version for both the single or two speed pump. This wet end may also be fitted to some Sta-Rite pump motors as well.
The back side of this wet end has two sets of threaded brass inserts, so that you can connect it to two sizes of motor
A common Wet End found on many Hot Tubs and Spas sold in the UK.
Part Number
- Balboa: 1215011
Technical Specifications
Wet End Information
| Configuration | Center Suction, Side Discharge |
| Impeller Diameter | 104 mm |
| Connection Diameter | 79mm |
| Spare Parts Available | No |
| Thread Type | Male - Buttress |
| Part No. | 1215011 |
| Impeller Dot Colour | Green, Brown, Red |
| Impeller Part No. | 1212230 |
| Impeller Vane Gap | 14 mm |
| Wet End Frame Size | 48F/56F |
| Impeller HP Rating | 2HP |
| Wet End HP | 2Hp |
Reviews (1)
Reviews (1)
We ordered the wet end specified, which arrived the following day. It was well packaged. We fitted it directly onto the motor, with no problem. Well satisfied.
Questions & Answers
Related Products
For Use with Iron Might
For Use with XP2e - Euro leg 6.1"
For Use with LP200/ WP200 - Post 2008
For Use with Niagara / Ultimax (Vico)
48 Frame/92mm
For Use with Executive 56F Range
For Use with Aqua-flo CMHP
Self Drain - 1.5HP
For Use with CMHP
For Use with Aqua-flo XP2e - 6.3"
For Use with Executive 48F Range
For Use with Executive 48F Range
For 2HP Pumps
For JA / TDA150