R1
Works with Chinese Spas
Works with Chinese Spas
R3
Works with Chinese Spas
Works with Chinese Spas
Product Details
LX Spa L Shape Heater - 3.0kW - H30-R2 + Switch Cable (340mm)
This heater unit has a in built hi-limit reset switch, psi sensor and cable with a 2 pin JST style connector. This cable connects to the PCB in the hot tubs spa pack.
These heaters can replace failed Rooster units , but may require a plumbing alteration
IMPORTANT: Ensure when installing that there is adequate water flow to generate back pressure for the sensor.
Plumbing Connection: 1.5"
Suitable for Chinese Spas
Model Information
| Model | H30-R2 + Switch Cable |
| Type | Flow Thru |
| MPN | H30-R2 + Switch Cable |
| Element | Incoloy |
| Integrated in Spa Pack | No |
| Sensor Type(s) | Pressure Switch - Flow, Hi Limit - Probe, Temperature - Probe |
| Mount Type | Stud |
| Length (includes tails) | 340 mm |
| Plumbing Connection | 1.5'' |
Electrical Info
| Power | 3 kW |
| Voltage / Hz | 230V - 50/60Hz |
| Amps | 3.0 |
Element Details
| Element Type | Incoloy |
| Element Length | 6.75" (170mm) |
Compatible Spa Pack
| Compatible Spa Pack | Other |
Heater Specification
| Supply V/Hz | 230V / 50Hz |
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
Technical Specifications
Model Information
| Mount Type | Stud |
| Sensor Type(s) | Pressure Switch - Flow |
| Sensor Type(s) | Hi Limit - Probe |
| Sensor Type(s) | Temperature - Probe |
| Model | H30-R1 |
| Length (includes tails) | 340mm |
| Plumbing Connection | 1.5'' |
| Type | Flow Thru |
| Element | Incoloy |
| Integrated in Spa Pack | No |
| MPN | H30-R1 without cable |
Heater Specification
| Supply V/Hz | 230V / 50Hz |
Compatible Spa Pack
| Compatible Spa Pack | Other |
Electrical Info
| Power | 3kW |
| Voltage / Hz | 230V - 50/60Hz |
| Amps | 13.6 |
Element Details
| Element Length | 6.75" (170mm) |
| Element Type | Incoloy |