Waterway Euro Blaster Jet Body Assembly

This jet body or socket is suitable for all Waterway's Euro Blaster Click-in jets. 

The body is attached to the spa shell and the jet back is screwed in. The fixing nut and gasket are supplied with the sleeve.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. The air inlet of each jet is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified. If you do not want bubbles in the water jets, block the air inlet with this cap.

IMPORTANT: Details of Gasket has been verified with our stock however Manufacturers do occasionally change the type of the gasket supplied with the body. If you require specific type of the gasket please contact us to check current version