Waterway Storm Jet Body Series - Thread-IN

Mini Storm Jet

This socket is designed for the new generation of Waterway Mini Storm thread-in jets. It is not suitable for snap-in jets, for which the old model must be used.

It is attached to the spa shell and the jet is screwed in. 

The fixing nut and the gasket are supplied with the sleeve.

Poly Storm Jet

All Waterway's Poly Storm thread-in jets fit into this body. It is not suitable for snap-in jets, for which the old model must be used.

The jet body is the fitting attached to the spa (inside and outside of the spa wall), which holds the jet in place. 

The fixing nut and the gasket are included.

Power Storm Jet

This Waterway socket works with all Power Storm thread-in jets. 

The socket is attached to the spa shell and the nozzle is screwed in. The fixing nut and the gasket are supplied with the sleeve.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. 

The air inlet of each nozzle is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified.

GLO bodies also allow for light to be incorporated into the jet.