Waterway Adjustable Jet Body Series

Waterway Adjustable Cluster Storm Jet Body

For use with Cluster Storm Jet fronts with either the Click-IN or Thread-IN fitting.

The Click-IN variant does NOT have an air connection, whereas the Thread-IN version does.

The body is attached to the spa shell and the jet back is screwed in. The fixing nut and gasket are supplied with the sleeve.

This Euro Cluster jet body or socket is suitable for all Waterway's Euro Cluster Click-IN jets. 

The body is attached to the spa shell and the jet back is screwed in. The fixing nut and gasket are supplied with the sleeve.

The water flow through the socket draws in air through the Venturi effect, which adds bubbles to the water jet and increases the power of the massage. The air inlet of each jet is normally connected to a manifold, and then to a valve, so that the air/water mixture in the jets can be modified. If you do not want bubbles in the water jets, block the air inlet with a cap.

The Mini jet body or socket is the fitting attached to the spa (inside and outside of the spa wall), into which the jet slots.

The sealing between the jet and the hull is provided by a gasket (to be purchased separately). 

We also recommend the use of  a neutral silicone (without aggressive solvents) on the wall fitting as well as on the threads to ensure a complete seal.