Poly Jet Body Assembly - Stacked Jet Body

Waterway jet body to fit poly jet fronts/internals. Supplied with standard length wall fitting 35mm

This Waterway Poly Jet socket has 32 mm sockets for both water and air (venturi suction).

Sockets configured as a tee, like this one, are designed to allow you to daisy chain jets on a relatively fat pipe. This is a simple plumbing configuration for spas with a small number of jets, and makes the entire system easier to disinfect, since there is less pipe and higher flow rates. For this reason, this type of jet is often seen on commercial spas.

The socket is delivered with a short wall fitting.

To ensure maximum sealing on both sides of your spa shell, we recommend using a gasket (not included) or silicone between the socket and the outer pool wall. This same seal, with additional acetone-free silicone, will provide a seal between the wall passage and the inner shell, if the latter is flat and smooth.