Motor Current Chart | Single & Three-Phase Motor FLC
Use this hot tub and swimming pool pump motor current chart to find the estimated full load current (FLC) for different motor sizes, kW ratings and supply voltages. The tables cover both single-phase and three-phase motors, making it easier to compare expected current draw when checking or replacing a pump motor.
Motor current charts are commonly used by hot tub engineers, electricians and spa technicians when diagnosing pump faults or checking motor specifications. Always use the motor rating plate to confirm the correct values for your specific motor. The figures below are a guide only.
What Is Full Load Current (FLC)?
Full load current is the amount of electrical current a motor draws when operating at its rated output. It is usually measured in amps (A).
Hot tub pumps and swimming pool pumps run during filtration, heating and jet operation. Comparing a motor's measured current against its rated full load current will help identify potential faults, including:
- Failing pump motors
- Damaged capacitors
- Tight or worn bearings
- Blocked impellers
- Incorrect voltage supply
- Worn pump components
A motor drawing more or less current than expected may indicate an electrical or mechanical problem. Always compare readings against the motor's rating plate and the manufacturer's specifications.
Why Is Motor Current Important?
Motor current is a useful measurement when checking the condition and performance of a pump. If a motor draws too much current, it may overheat, trip the electrical protection system or suffer internal damage.
High current draw can be caused by:
- Blocked impellers or restricted water flow
- Seized or worn pump bearings
- Water entering the motor
- Incorrect voltage supply
- Damaged capacitors
- Tight pump seals or mechanical restrictions
Low current draw can also indicate a problem, such as low voltage, damaged motor windings, faulty capacitors or loose electrical connections.
Single-Phase and Three-Phase Pump Motors
Single-phase and three-phase motors use different electrical supplies, so their current ratings will differ even when the motors have the same kW rating.
Most domestic hot tubs use single-phase pump motors. Three-phase motors are more common in larger commercial spas, swimming pools and high-flow water systems.
Before using the current lookup charts below, check the motor rating plate to confirm whether your motor is single-phase or three-phase, along with its rated voltage and kW output.
Motor RPM and Current Draw
Motor speed is measured in revolutions per minute (RPM). Common pump motor speeds include approximately 1,450rpm and 2,800rpm.
Motor speed, load and design all influence current draw. Two motors with the same kW rating may not have identical current requirements, so always use the motor's own rating plate when checking its specifications.
Single-Phase Motor Full Load Current Chart
Use the single-phase motor current chart below to find the estimated full load current for common motor sizes. It includes kW ratings, horsepower (HP) and current values at different supply voltages.
For example, a 0.75 kW single-phase motor is listed at 7.3A on a 220V supply and 6.7A on a 240V supply.
| Motor Rating | HP | 110V AC | 220V AC | 240V AC |
|---|---|---|---|---|
| 0.07 kW | 1/12 | 2.4 | 1.2 | 1.1 |
| 0.1 kW | 1/8 | 3.3 | 1.6 | 1.5 |
| 0.12 kW | 1/6 | 3.8 | 1.9 | 1.7 |
| 0.18 kW | 1/4 | 4.6 | 2.3 | 2.1 |
| 0.25 kW | 1/3 | 5.8 | 2.9 | 2.6 |
| 0.37 kW | 1/2 | 7.9 | 3.9 | 3.6 |
| 0.55 kW | 3/4 | 11 | 5.5 | 5 |
| 0.75 kW | 1 | 15 | 7.3 | 6.7 |
| 1.1 kW | 1.5 | 21 | 10 | 9 |
| 1.5 kW | 2 | 29 | 13 | 12 |
| 2.2 kW | 3 | 37 | 19 | 17 |
| 3 kW | 4 | 48 | 24 | 22 |
| 3.7 kW | 5 | 54 | 27 | 25 |
| 4 kW | 5.5 | 60 | 30 | 27 |
| 5.5 kW | 7.5 | 85 | 41 | 39 |
| 7.5 kW | 10 | 110 | 55 | 50 |
Three-Phase Motor Full Load Current Chart
This three-phase motor current chart shows estimated full load current for a range of motor sizes, from smaller 0.1 kW motors through to larger 150 kW motors. Use the kW rating and supply voltage to find the corresponding current in amps.
The chart includes common three-phase supply voltages of 220V, 240V, 380V, 415V and 550V. It also includes the equivalent horsepower rating for each motor size.
| Motor Rating | HP | 220V AC | 240V AC | 380V AC | 415V AC | 550V AC |
|---|---|---|---|---|---|---|
| 0.1 kW | 1/8 | 0.7 | 0.6 | 0.4 | 0.4 | 0.3 |
| 0.12 kW | 1/6 | 1 | 0.9 | 0.5 | 0.5 | 0.3 |
| 0.18 kW | 1/4 | 1.3 | 1.2 | 0.8 | 0.7 | 0.4 |
| 0.25 kW | 1/3 | 1.6 | 1.5 | 0.9 | 0.9 | 0.6 |
| 0.37 kW | 1/2 | 2.6 | 2.3 | 1.4 | 1.3 | 0.8 |
| 0.55 kW | 3/4 | 3.1 | 2.8 | 1.8 | 1.6 | 1.1 |
| 0.75 kW | 1 | 3.5 | 3.2 | 2 | 1.8 | 1.4 |
| 1.1 kW | 1.5 | 5 | 4.5 | 2.8 | 2.6 | 1.9 |
| 1.5 kW | 2 | 6.4 | 5.8 | 3.7 | 3.4 | 2.6 |
| 2.2 kW | 3 | 9.5 | 8.7 | 5.5 | 5 | 3.5 |
| 3.0 kW | 4 | 12 | 11 | 7 | 6.5 | 4.7 |
| 3.7 kW | 5 | 15 | 13 | 8 | 8 | 6 |
| 4.0 kW | 5.5 | 16 | 14 | 9 | 8 | 6 |
| 5.5 kW | 7.5 | 20 | 19 | 12 | 11 | 8 |
| 7.5 kW | 10 | 27 | 25 | 16 | 15 | 11 |
| 9.3 kW | 12.5 | 34 | 32 | 20 | 18 | 14 |
| 10 kW | 13.5 | 37 | 34 | 22 | 20 | 15 |
| 11 kW | 15 | 41 | 37 | 23 | 22 | 16 |
| 15 kW | 20 | 64 | 50 | 31 | 28 | 21 |
| 18.5 kW | 25 | 67 | 62 | 39 | 36 | 26 |
| 22 kW | 30 | 74 | 70 | 43 | 38 | 30 |
| 30 kW | 40 | 98 | 91 | 57 | 52 | 41 |
| 37 kW | 50 | 130 | 119 | 75 | 69 | 50 |
| 45 kW | 60 | 147 | 136 | 86 | 79 | 59 |
| 55 kW | 75 | 183 | 169 | 106 | 98 | 72 |
| 75 kW | 100 | 238 | 219 | 138 | 126 | 95 |
| 90 kW | 125 | 301 | 289 | 170 | 155 | 117 |
| 110 kW | 150 | 360 | 325 | 205 | 189 | 142 |
| 130 kW | 175 | 410 | 383 | 245 | 224 | 169 |
| 150 kW | 200 | 505 | 440 | 273 | 255 | 192 |
How to Read a Three-Phase Motor Current Chart at 415V
If you are checking a three-phase motor supplied by a 415V system, use the 415V AC column in the chart above. Find the motor's kW rating in the first column, then read across to the 415V value to see its estimated full load current in amps.
For example, the chart lists an estimated full load current of 8A for a 3.7 kW motor at 415V, and 11A for a 5.5 kW motor.
These figures are reference values only. Motor design, efficiency and power factor will affect the actual current draw. Always check the motor rating plate before making electrical or replacement decisions.
Common Causes of High Motor Current Draw
If a pump motor is drawing more current than its rated value, check for possible mechanical or electrical faults. Common causes include:
- Blocked impellers or restricted water flow
- Seized or worn pump bearings
- Water ingress into the motor
- Incorrect voltage supply
- Damaged capacitors
- Tight pump seals
- Plumbing restrictions
A motor drawing excessive current may become noisy, overheat or stop working completely. Further inspection will be needed to identify the cause.
Motor Electrical Safety Checks
Always isolate the power supply before inspecting a hot tub or swimming pool pump motor. Electrical testing must be carried out by a suitably qualified person using the correct equipment.
- Confirm the motor supply voltage
- Check the motor rating plate
- Inspect the capacitor and wiring connections
- Check that the pump shaft rotates freely
- Compare measured current against the motor specifications
Never work on live electrical equipment. If you are unsure about a reading or electrical connection, use a qualified electrician or experienced technician.
Replacement Hot Tub and Pool Pumps
If your pump motor has failed or its current draw is outside the manufacturer's specifications, you may need replacement components or a complete pump.
Depending on the fault, replacement parts may include capacitors, pump wet ends, shaft seals, bearings or a complete motor and pump assembly.
Browse our range of hot tub and swimming pool pumps for replacement options. Make sure you check the motor's voltage, power rating, connections and dimensions before ordering.
Need Help Identifying a Pump Motor?
If you need assistance identifying a replacement pump or checking a motor specification, contact the Hydrospares team. Have the details from the motor rating plate ready, including the kW rating, voltage, phase and RPM. This will help us identify the correct parts for your system.
Contact Hydrospares for further assistance.