Adding Pure Spa Salt to your hot tub enables the sanitising system to generate free chlorine which keeps your hot tub water safe and bacteria free

Key Features

Use to generate free chlorine
Contains no anti-caking agent
50ml scoop provided for easy application AquaSPArkle Pure Spa Salt is suitable for use with hot tub salt water sanitising systems.

Adding Pure Spa Salt to your hot tub enables the sanitising system to generate free chlorine which keeps your hot tub water safe and bacteria free.
AquaSPArkle Pure Spa Salt contains no anti-caking agents that could otherwise affect the sanitising cell.

Application Instructions
1. Balance the hot tub water in accordance with the guidelines in your hot tub owner’s manual.
2. With the jets running, slowly apply the required amount of AquaSPArkle Pure Spa Salt into the filter compartment. Add one scoop (approx. 75g) at a time, until the correct amount has been added.
3. Allow the jets to run for an additional 5 minutes to ensure the salt is fully dissolved.
4. Periodically, a top-up dose may be required to ensure the salt level is maintained.

Litres    Gallons      Dose to achieve 1,500mg/l salt level       Dose to achieve 2,000mg/l salt level 1,000       Dose to achieve 2,500mg/l salt level
1000      220          1.5kg                                                            2kg                                                                       2.5kg
1,500     330          2.25kg                                                          3kg                                                                       3.75kg

Swimming pool dose rate:  Apply 1kg of Pure Salt per m3 of pool water to achieve a salt level of 1,000mg/l. Note:

Moisture may cause the product to become lumpy, so always replace the lid securely after use and store in a cool dry place.