HydroAir - Classic Line Control Box 20-0243
HydroAir - Classic Line Control Box 20-0243
Recommended Additions
3 x On/Off
Pump / Light / Blower
Blue LED Ring - No Symbol
Blue LED Ring - Blower Symbol
Blue LED Ring - Light Symbol
Blue LED Ring - Pump Symbol
1 Function On/Off
2 Function On/Off
5v JST style snap-on connector
3 x On/Off Function + Heater Outlet
Pump, Blower, Light
Raised Center - Blue LED Ring - Light Symbol
Product Details
HydroAir Classic Line Control Box 20-0243 - 3 Function On/Off
This control box allows on/off operation of 3 x pieces of equipment, i.e pumps blowers or lights.
The Classic Line control box series can be used to replace older HydroAir single, double or triple command units without the touchpad quick connection, A.K.A system 500 Electronic Standard systems.
If your system is a quick connection box (prefixed 22-xxxx) then you must also replace the touch pad.
See downloads for user instruction and settings.
Classic line box additional options
1 FUNCTION:
By moving a set of jumpers you can use the box for water inlet or water level control.
2, 3 & 4 FUNCTION:
Via the jumper setting choose automatic dry-out of air system if relevant.
Use special PIC for single touch control. e.g. a blower and a light with only one LED button. The possibilities are almost endless.
3 & 4 FUNCTION:
Integrated RF module for remote control unit (25-2604).
NEW! We can now offer a remote control for this control box:
The control boxes are designed for our Round and Oval touches and our LED buttons. However a built-in RF (radio frequency) module allows you to control the 3 and 4 functions boxes with an elegant remote control, which of course is waterproof and can float. Remote Control
Control Box Specifications
Summary
- Rated voltage: 230V, 50/60Hz, single phase
- Rated power: 3680W
- Rated current: 16A (The outlets A, B and C can individually be loaded with up to max 3680W @ 16A each. However the total sum of the loads must not exceed the rated power and current.)
- Output Connection: 3
- Control Connections: 1 Use with HydroAir touch pads or LED buttons.
- Waterproof rating: IXP5
- Water Level Connection: Yes JST Plug (25-0211-5)
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
Downloads
Reviews (1)
Reviews (1)
Questions & Answers
Related Products
2 Pump Systems
Quality piece of equipment does exactly what it should do