Astrel Spa Pack - Easy Mini Plus
Astrel Spa Pack - Easy Mini Plus
Recommended Additions
3/4"x 3/8" Barbed
3/4" Rib Barb
PG Connector
Product Details
EasyMini line is the range of electronic controls for entry level SPAs. Flexible, easy to install, it has the same main characteristics of the EasyMini Line Controls. The smart management of loads function optimises loads activation,capturing the real amperage draw instead of the number of working loads. Automatic configuration of the SPA is possible thanks to a programming key, avoiding typical setting procedure through the keypad. The programming key, equipped with and SD card, allows firmware up-date directly on-board. A standard serial port RS 485 is available, in order to permit the integration of EasyMini with other systems or accessories. The control can drive an external heater (max 3.6 kW).Equipped with an optional level sensor, EasyMini has also an enhanced safety function which stops loads activation if there is no enough water in the SPA.
- 2 Pumps and Circulation Pump
- Smart Management of Loads
- Automatic Programming
- Auto Learning
- Small Dimensions
- No Special Connectors Needed
- Easy Installation
- RS 485 Port
Compatible Topsides:
- K19, K9, K79, K91, K8 and K35
Spa Pack Specifications
Dimensions
- Spa Pack: 288 x 213 x 112 (mm)
Ratings
- Power Supply: max. 32A @ 240V 50/60Hz
- Pump: 2HP @ 230V
- Blower: 1.2kW @ 230V
- Ozonator: 1A @ 230V or 350mA @ 12V
- Light: 2A @ 12V
- Heater: max 3.6kW @ 230V
- Operating Temp: 0-50°C
- Storage Temp: 5-45°C
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
Technical Specifications
Announcement
| Discontinued item | 1 |
Downloads
Reviews (0)
Reviews (0)
Questions & Answers
Related Products
Compatible with Spa Power SP600/601 Spa Packs
Replacement Part