Serenity Plus Pneumatic Kit - PureLight Illuminex Light inc Controller + 20 bullet Lights
Our Serenity Plus Pneumatic lighting kit includes all you need to fit a main Illuminex Light with Controller + 20 waterline bullet lights to any spa, hot tub or bath, which can be used with air buttons for control.
This simple but effective kit does not require a separate controller as all the lights/colour change options are controlled by a main Illuminex Light which has its own on board control. The system is controlled by switching the power source on/off via a top side mounted air button.(not supplied)
Perfect for adding some mood lighting to your spa or bath.
Serenity Kit Includes
- 1x Illuminex Light with Controller
- 1x Sngle function pneumatic control box
- 1x 12v Transformer (for 240v control boxes if required)
- 1 x Bulb housing for Illuminex Light
- 5x Quad RGB daisy chain assembly bullet lights
- 20x Frosted Bullet lenses
- 20x Rear nylon nuts (fix lens to shell)
- 20x Lens O-rings (seal lens to shell)
- 20x Compression nuts & O-rings (secure LED into lenses)
Light Kit Features
- Variety of colours, including Cyan, Yellow, Strobe, Red, Blue, White, Magenta, Green
- Selectable "On Board" colour-controller that can control up to 20 waterline bullet lights
- 12v AC light output
- Moisture Proof
- Can be used with any 12 volt supply control system
- Compatible with all PureLight lighting system
Note
- Tools, Air button & Air hose are not supplied with this Kit.
- We recommend the Transformer be housed in a water tight enclosure (not supplied)
- Product Images my differ slightly to products supplied
Power supply
- Input 230V/50Hz
- Output 11.5V AC~4A
Daisy Chain Single Points of LED - 4 RGB (Quad) with Extra Long Leads (x5)
- Typical Max current: 80mA
- Connector Cable length: 1930mm
- LED cable inner/outer length: 610mm / 915mm
Illuminex Light inc Controller
- Input 12 VAC/12 VDC; Output 12 V, 1 A Max
Typical Current (nonload) = 100mA
Typical Current (with max load) = 750 mA
| Colour Modes |
|
|
|---|
| Cycle # | Colour Mode | Description |
| 1 | White | Red, Green, and Blue ON (White) |
| 2 | Red | Only Red ON |
| 3 | Green | Only Green ON |
| 4 | Blue | Only Blue ON |
| 5 | Red/Green | Only Red and Green ON |
| 6 | Red/Blue | Only Red and Blue ON |
| 7 | Green/Blue | Only Green/Blue ON |
| 8 | Slow Color Wheel | LED’s change color - very slowly( 30 seconds ) from:
Green/BlueBlue/RedRed/Green |
| 9 | Color Flash | LED’s change color every few seconds from: Blue/Green Red/Blue Blue Red/Green Green Red |
| 10 | Color Wheel | LED gradually changes (6 seconds) color from: Green/Red Red/Blue Blue/Green |
